|
|

COLBOND Products
Permanent Erosion Control
Enkamat 7003
Enkamat® 7003 is a lightweight
three-dimensional turf reinforcement mat (TRM)
made of continuous monofilaments fused at their intersections.
Ninety-five
(95%) percent of the
Enkamat is open and available for soil, mulch
and
root interaction,
creating the most
effective root reinforcement mat (R2M) available.
Enkamat is manufactured from nylon to
eliminate the buoyancy factor associated with
submerged conditions and provides
permanent TRM protection in vegetated channels
as well as on slopes.
Enkamat 7010, 7020
Enkamat® 7010 and 7020
are three-dimensional turf reinforcement mats (TRMs)
made of
continuous
monofilaments fused at their intersections. Ninety-five
(95%) percent of the Enkamat is
open and available for soil, mulch and root interaction,
creating the most effective root
reinforcement mat (R2M) available. Enkamat is manufactured
from nylon to eliminate the
buoyancy factor associated with submerged conditions
and provides permanent TRM
protection in vegetated channels as well as on slopes.
Enkamat S 7520
Enkamat® S is a high-performance geosynthetic
composite that incorporates a high
tenacity polyester geogrid within the entangled filaments
of the three-dimensional turf
reinforcement mat (TRM). The combination of a high-strength
tensile member and a
high performance TRM provides unique properties for new
and unique applications, with
or without vegetation, in channels, steep slopes and as
a grip layer under vegetated
veneers.
Drainage
Enkadrain 3611R, 3615R, 3811R
Enkadrain 3611R and 3615R are
both of a new generation of environmentally conscious
Enkadrain products.
This drainage composite consists of a post-industrial recycled
polypropylene drainage core of
fused, entangled filaments and a geocomposite fabric bonded
to one side. The entangled
filaments are molded into a square waffle pattern that maintains
the flexible design of other
Enkadrain products. This product, because it exceeds 40% post-industrial
recycled content, can
help contribute up to 2 LEED points when used in conjunction
with other recycled content
products. Enkadrain 3611R can contribute towards additional
LEED points when used with a
green roof by reducing stormwater runoff, heat islands and
energy consumption. The second fabric found in Enkadrain 3811R
eliminates the need for protection board and stops penetration
and migration
of bitumen membrane.
Enkadrain 9120
Enkadrain 9120 is a drainage
product consisting of a nylon core of fused, entangled filaments
and a geotextile fabric bonded to one side. The product is
used as a means of relieving hydrostatic
pressure from backfills abutting below grade structures,
planters and for lateral drainage of
roof decks.
EnkaRetain & Drain 3111
EnkaRetain & Drain is
one of a new generation of products designed specifically
for vegetated
roofs. This multi-function composite consists of a 50% post-industrial
recycled polypropylene
drainage core of fused, entangled filaments and a specially
formulated water retention fabric
bonded to one side. The entangled filaments are molded into
a square waffle pattern that maintains
the flexible design of other Enkadrain products. The composite
water retention fabric consists
of a 8 oz/yd² - 100% post consumer recycled non-woven
polyester fabric mechanically
bonded to a 12 oz/yd² layer of synthetic hydrophilic
(water) absorbent mat. The absorbent mat is
designed to hold 10 to 12 times its unit weight of water.
It is a very strong, durable composite
that is extremely resistant to puncture and tearing.
The composite is inert to biological degradation
and naturally encountered chemicals, alkalis, and acids.
This product can help contribute up
to 2 LEED points when used in conjunction with other
recycled content products. As a part of a
green roof it can contribute towards additional LEED
points by reducing stormwater runoff, heat
islands and energy consumption.
Enkaturf Drain 9320, 9323
Enkaturf Drain 9320 (6
inch wide ) and Enkaturf Drain 9323 (12
inch wide) are strip drain products consisting of a one
inch thick nylon core
of fused, entangled filaments completely encased in a nonwoven
heat-bonded geotextile fabric.
Enkaturf Drain strips eliminate the need for perforated drainage
pipe and the associated ordeal of
installing a larger diameter drain with surrounding aggregate.
Lab Information
Colbond does in-house testing and
also uses TRI Environmental for certain tests.
TRI testing labs hold the
following credentials:
|
|
|
Your free access, on-line
technical information resource for all manner of geosynthetics!
Visit www.geosynthetica.net for
more information on the geosynthetics industry - its materials, calendar,
news, directory and 1000's of technical documents.
|
geosIndex
copyright 2006 geosynthetica.net - all site contents, formatting
and work product protected by international copyright. While
considerable effort has been made to ensure the accuracy
of information posted on geosindex.com, the site’s
host, geosynthetica.net, accepts no responsibility for errors
or omissions in the information presented herein, or for
errors which may occur in downloading and printing any of
the pages or files, nor any liability resulting from the
use of this information for design and construction applications.
All product data has been provided by the manufacturers and
distributors participating in this site. geosynthetica.net/
geosindex assumes no liability for the accuracy or completeness
of this information or for the ultimate use by any purchasers.
This site is an engineering resource, but it should not be construed as engineering
advice.
Home - Companies
Listed - Links & Guidance - ASTM
Index - CEN
Index - ISO
Index - Contact
Us |
|

|
|