|
|
PROPEX
Products
Made from the highest quality
polypropylene fibers, our Geotex® nonwoven geotextiles
are needlepunched to form a strong fabric that retains its
dimensional stability, adding years to the life of any roadway,
railroad,
landfill or civil/
environmental engineering project. Used in subsurface drainage,
separation, stabilization, erosion control and cushioning
applications, our geotextiles are resistant to ultraviolet
(UV) degradation and to biological and chemical environments
normally found in soils.
Geotex® 401
Applications
include: filtration, stabilization, separation, drainage
and silt fence.
Geotex® 601
Applications
include: filtration, stabilization, separation, erosion control
and drainage.
Geotex® 801
Applications include: filtration,
stabilization, separation and erosion control.
Geotex® 200ST
Applications include: stabilization
and separation.
Geotex® 250ST
Applications include: stabilization
and separation.
Geotex® 315ST
Applications include: stabilization
and separation.
Geotex® 104F
Applications include: filtration,
stabilization, separation, erosion control and drainage.
Our Petromat® paving
products are designed to extend the life of highways, city
streets, parking areas and
airport pavements. These easily installed interlayer products
address specific pavement problems by providing a moisture
barrier against water intrusion and a stress absorbing membrane
to retard reflective cracking. They also lower the life-cycle
cost of pavements by improving performance and reducing maintenance.
Petromat® 4597
Applications
include: asphalt overlay.
Lab Information
Propex labs hold the following
credentials:
Propex
Attn: Tom Baker
(770) 944-4718
Certification
Information
Propex maintains ISO 9001:2000 Certification
in all of our plants.
Propex
meets the following (AASHTO) M288-05 specifications:
Geotextile |
Category
|
Application
|
Geotex® 801
Geotex® 601 |
Class 1/Type IV (A-C)
Class 2/Type IV (D-F)
|
Permanent Erosion Control |
Geotex® 601
Geotex® 401 |
Class 2/Type I (A-C)
Class 3/Type I (D-F)
|
Drainage |
Geotex® 801
Geotex® 601
Geotex® 401 |
Class 1/Type II (A)
Class 2/Type II (B)
Class 3/Type II (C)
|
Roadway Separation |
Geotex® 801
Geotex® 601 |
Class 1/Type III (A)
Class 2/Type III (B)
|
Roadway Stabilization |
Petromat® 4597 |
Exceeds AASHTO M288-05
|
Moisture Barrier and Stress Absorbing Interlayer
beneath asphalt overlay or a chip seal |
|
|
|
Your free access, on-line
technical information resource for all manner of geosynthetics!
Visit www.geosynthetica.net for
more information on the geosynthetics industry - its materials, calendar,
news, directory and 1000's of technical documents. |
geosIndex
copyright 2006 geosynthetica.net - all site contents, formatting
and work product protected by international copyright. While
considerable effort has been made to ensure the accuracy
of information posted on geosindex.com, the site’s
host, geosynthetica.net, accepts no responsibility for errors
or omissions in the information presented herein, or for
errors which may occur in downloading and printing any of
the pages or files, nor any liability resulting from the
use of this information for design and construction applications.
All product data has been provided by the manufacturers and
distributors participating in this site. geosynthetica.net/
geosindex assumes no liability for the accuracy or completeness
of this information or for the ultimate use by any purchasers.
This site is an engineering resource, but it should not be construed as engineering
advice.
Home - Companies
Listed - Links & Guidance - ASTM
Index - CEN
Index - ISO
Index - Contact
Us |
|
|
|
